MM2K6 Room Cooler evap cooling mod modification

Goonie Goat

Baked
Community Member
User ID
3548
I have to move my set up out into the shed because the wall will be comming down where it is to become a second lounge room. So will be building one from insulated coolroom panels. 3m ×1.2 × 2 high. It will need to be a sealed setup running c02 in summer to combat the Brisbane weather. So 7.2 m3 will be the area i need cooled
Hmm, are you still going to be using the shed to work on things?

Your shed should be on its own circuit probably on a 20 amp breaker, you could daisy chain off one of the power points and run your 2.5mm 3 core earth/live/neutral through conduit to the spot you want to put your aircon condenser, hook that upto one of these

Hook your split AC up to a plug and plug into isolator.

Anything under 5.5kw is legal to hook upto a plug, you will only need like 3kw
 

Please join our community to continue reading

Forgot your password?
Don't have an account? Register now

MM2K6

Blooming
Community Member
User ID
7691
Yeah i need aircon just don't want to draw to much juice
That's why I got the small one but, it was completely useless! I'd get a proper box A/C or high efficiency split system. My mate runs one of the good portable one that you vent out the window, some of them have ok energy rating.
 

SRH

Germinating
Community Member
User ID
286
Yeah i need aircon just don't want to draw to much juice

Yeah i need aircon just don't want to draw to much juice
 

ED-209

Blooming
User ID
775
Aren't you always going to have a problem with thermodynamics with these sorts of things if they dump the heat of the cooling unit back into the same space it is cooling - regardless of cooling efficiency of the cooler alone.

The comparison says it's a personal cooler - like small space heaters - I'm guessing to justify it's use despite low efficiency

Capture1.PNG
Capture.PNG
 
Top Bottom