Buds drying quick

Please join our community to continue reading

Forgot your password?
Don't have an account? Register now

OZIOZIAUTO

Baked
User ID
2870
Actually I have another question .
When flushing if you are a flusher does one pH the water even tho it's ro with 008 ppm and sitting at 6.8 on its own .... Can it be fed to the girls
Which leads me to another question ( now I will see if anyone is reading this far.) 🤪
Can unphed water say at 6.10 full grow .... Or just flush with whatever comes out ?????
Soz for the B's explanation
 

VinDeezle

Baked
Community Member
User ID
2953
You can rehydrate the bud as well...put it in a sealed jar and see what the humidity is after a while...if it's low, add a bit of moist sponge or lettuce leaf in there and it will rehydrate, just don't have it sitting on the bud.

I had some I left to dry and got stuck at work for an extra week..when I came back it was struggling to hold 50% in a jar.. after a few days with a small piece of moist sponge In there, it rehydrated and held 64%.
 

Northface Gorilla

Vegetating
User ID
2657
Actually I have another question .
When flushing if you are a flusher does one pH the water even tho it's ro with 008 ppm and sitting at 6.8 on its own .... Can it be fed to the girls
Which leads me to another question ( now I will see if anyone is reading this far.) 🤪
Can unphed water say at 6.10 full grow .... Or just flush with whatever comes out ?????
Soz for the B's explanation
I’m not sure about that end of things Ozi I just use rain water, never do any Ph test or anything just straight in, probably should get onto it once I have the tent running properly
 

Northface Gorilla

Vegetating
User ID
2657
Ye
You can rehydrate the bud as well...put it in a sealed jar and see what the humidity is after a while...if it's low, add a bit of moist sponge or lettuce leaf in there and it will rehydrate, just don't have it sitting on the bud.

I had some I left to dry and got stuck at work for an extra week..when I came back it was struggling to hold 50% in a jar.. after a few days with a small piece of moist sponge In there, it rehydrated and held 64%.
Yeah I’ve done that before works well. I think keeping the humidity up when possible can be better for preventing terp degradation
 

Northface Gorilla

Vegetating
User ID
2657
Thanks @Northface Gorilla
Sometimes ya gotta go with your gut...uno wat I mean.....
And yesterday being day 3 of dry just seem too crispy and I think it's the Aircon set at 22 ??
Is that too low do u think bro ?
In my experience temperature doesn’t matter as much as long as it’s under the 28 degree mark it’s mainly the humidity and airflow. If the aircon is pumping it will drop the humidity in ya house
 

Madmick

Baked
User ID
2412
I new it...
I reckon there fucked now
Cookies....cookie monster....
Nah mate you fucked nothing, you're flushing so you don't want the plant to absorb any anyway

If I flush , rarely I don't ph. Straight from hose to pot

That's the aim of the flush. Flush any nutrients from your neutral medium, perlite , canna clayballs dwv, and coco any of them mixed together back to neutral, most water supplies in out major cities water is close ti pH 7.0 , neutral

And the plant doesn't get any more in it
 

VinDeezle

Baked
Community Member
User ID
2953
It has its own brand spanking new ac corse I'm spending money on the room..
L9king at techplex lighting have u heard of them bro
I put picked up a techplex 240w board off a mate for $40 with a bung driver. Replaced it with the same elg-240 driver minus dimmer and it goes really well in a 3x1.6. exceptional footprint. Not quite the right footprint for a 2x4 though. If the spaced the boards out another 6" in the middle, it would be a good fit for a 2x4.
IMG20230206152720.jpg
I'm getting 55k ( roughly 900umol/s at this spectrum) in the hotspot and 40k (650umol/s) in the corners at 16" and around 180w.

Pretty sure these boards are everywhere. I have another and it's branded "maxkon" with maxkon printed on the boards. It's going in the second 3x1.6 in a few weeks.
 
Last edited:

Kee Mao

Baked
User ID
1731
You can rehydrate the bud as well...put it in a sealed jar and see what the humidity is after a while...if it's low, add a bit of moist sponge or lettuce leaf in there and it will rehydrate, just don't have it sitting on the bud.

I had some I left to dry and got stuck at work for an extra week..when I came back it was struggling to hold 50% in a jar.. after a few days with a small piece of moist sponge In there, it rehydrated and held 64%.
Old timers used rehydrate tabbaco with citrus peel. Place skin side down.
 

Madmick

Baked
User ID
2412
900 is pretty much the maximum without the need for co2

Is that a full capacity?

How do you measure your spectrum if you turn it down ?
 
Top Bottom