Indy
Misfit
- User ID
- 57
Finished up this organiser yesterday. If you're unfamiliar to ball vape's, they're a setup that requires a couple pieces to come together to work. So you've either got to have a place like a desk or a nook to set them up in. Or you could use a organiser similar to something like this.
I've taken this route because i'll only bring it out at night once the kids have gone to bed, and i don't want paraphernalia like this out for them to see.
Anyway, cost about $50 in bits and pieces, but i did have most of the material here already. Basically it has the Enail Controller sandwiched between two bits of 19mm ply, with 3mm and 5mm rubber strips in between to allow space for airflow..
![bvo_01.jpg bvo_01.jpg](https://www.theserratededge.com/forum/data/attachments/33/33216-50c7b9f69ee2107dbe8ada61fc433703.jpg)
![bvo_02.jpg bvo_02.jpg](https://www.theserratededge.com/forum/data/attachments/33/33217-ba9f8dd0982b80697f7e0beac9698809.jpg)
![bvo_03.jpg bvo_03.jpg](https://www.theserratededge.com/forum/data/attachments/33/33218-c801d8f8537480892f546f34fd723a63.jpg)
![bvo_04.jpg bvo_04.jpg](https://www.theserratededge.com/forum/data/attachments/33/33219-a4207c03f5d761952036b92f8964eab3.jpg)
![bvo_05.jpg bvo_05.jpg](https://www.theserratededge.com/forum/data/attachments/33/33220-ea8c57fcd68d0a5424ed96257a319fe0.jpg)
![bvo_06.jpg bvo_06.jpg](https://www.theserratededge.com/forum/data/attachments/33/33221-a4badbefe62083599136e9607ea60cf1.jpg)
As you can see, she's a pretty rough build. I'm envisioning another build at a later date that will iclude a couple of USB ports, and a charging dock for the Mighty+. This is just a throw-together to tidy up the shit required for a ball vape.
I've taken this route because i'll only bring it out at night once the kids have gone to bed, and i don't want paraphernalia like this out for them to see.
Anyway, cost about $50 in bits and pieces, but i did have most of the material here already. Basically it has the Enail Controller sandwiched between two bits of 19mm ply, with 3mm and 5mm rubber strips in between to allow space for airflow..
![bvo_01.jpg bvo_01.jpg](https://www.theserratededge.com/forum/data/attachments/33/33216-50c7b9f69ee2107dbe8ada61fc433703.jpg)
![bvo_02.jpg bvo_02.jpg](https://www.theserratededge.com/forum/data/attachments/33/33217-ba9f8dd0982b80697f7e0beac9698809.jpg)
![bvo_03.jpg bvo_03.jpg](https://www.theserratededge.com/forum/data/attachments/33/33218-c801d8f8537480892f546f34fd723a63.jpg)
![bvo_04.jpg bvo_04.jpg](https://www.theserratededge.com/forum/data/attachments/33/33219-a4207c03f5d761952036b92f8964eab3.jpg)
![bvo_05.jpg bvo_05.jpg](https://www.theserratededge.com/forum/data/attachments/33/33220-ea8c57fcd68d0a5424ed96257a319fe0.jpg)
![bvo_06.jpg bvo_06.jpg](https://www.theserratededge.com/forum/data/attachments/33/33221-a4badbefe62083599136e9607ea60cf1.jpg)
As you can see, she's a pretty rough build. I'm envisioning another build at a later date that will iclude a couple of USB ports, and a charging dock for the Mighty+. This is just a throw-together to tidy up the shit required for a ball vape.